Lentilles church - assembly instructions

 

assemblage

Lentilles porche

Lentilles abside

Assembly follows parts numbering.

1 - Begin with the nave (parts #2 and #3) glued on base #1. Glue front #5 on part #3. Glue inside wall #4. Fold scale #6 and glue it on the mark on front #5.

2 - Fold lateral walls #7 and #8 and glue in place on each side of the nave. Put and glue inner walls #9 and #10.

3 - Build the porch #11: cut and double this part. Put in position and glue it.

4 - Put lateral roofs #13 and #14 glue it and after glue the porch's roof #12. Glue the part #16 on part #5. Glue part #15 on the middle of roof #12. Double the part #27 and put it against the little roof #15.

5 - Close the 3 patches of roof #18 and glue part #17 very close to the roof's end. Verify symetrie, put and glue on the nave: part #17 will be in contact of part #16.

6 - Build the vestry #19 with roof #20. Put in palce and glue it against wall of the nave.

7 - Build the octogonal steeple with part #21 and the ring #22 glued down and closed with part #23.
Fold #24 and glue #25 on it. Glue 3 rings #26 on #24 (white marks).
Glue together the two parts of the steeple. Put it in place on the top of roof #18. Verify the vertical position.

Return

 


Updated January 14, 2001
© 1999-2001 - P. Gauriat - Diffusion interdite sans autorisation.
Distribution prohibited without permission